Condition of Federal Pocket Surf III
Unit is in excellent new condition, having never been used.
Comes with:
![]() |
Fitted Case |
|
Federal Pocket Surf III |
|
General Pupose Probe |
|
125 μ”/3,2 μm(nominal) Reference Specimen (master) |
|
"V" Fixture (EAS-2421) |
|
Setting Pin, 1/8"/3,2mm Dia., for adjusting the "V" fixture |
|
Riser Plate, for calibrating the gage with the Reference Specimen |
![]() |
Manual New 9-Volt Alkaline Battery |
Pocket Surf III Description-Specifications
DESCRIPTION: Pocket-sized, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory. Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gagging.
Can be used to measure any one of four, switch selectable, parameters: Ra , Rmax/Ry , Rz.
Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/ .030 in Operates in any position – horizontal, vertical, and upside down four switchable probe positions – axial (folded) or at 90°, 180° or 270° Even difficult-to-reach surfaces such as inside and outside diameters are accessible. Integrated data output for SPC-processing units that is compatible with the most common data processing systems. easy-to-read LCD readout presents the measured roughness value, in micro inches or micrometers, within half a second after the surface is traversed.
Out-of-range (high or low) and “battery low“ signals are also displayed.
Dimensions 140 mm x 76 mm x 25 mm / 5.5 in x 3 in x 1 in Weight 435 g
Measuring range Ra 0,03 µm to 6,35 µm / 1 µin to 250 µin Ry 0,2 µm to 25,3 µm / 8 µin to 999 µin Rmax 0,2 µm to 25,3 µm / 8 µin to 999 µin Rz 0,2 µm to 25,3 µm / 8 µin to 999 µin Display Resolution 0,01 µm / 1 µin Measurement Accuracy Meets ASME-B46.1, ISO, DIN standards and MIL specifications
Digital Readout LCD; with; „Battery low“ signal; „H“ and „L“ (measured values out-of-range)
Seller Info: